SP Coatings Conversions

WFT (Wet Film Thickness) / DFT (Dry Film Thickness) / Convert mils to microns
% solids by volume = +/- 2%
1 mil equal to 1/1000 of an inch (2.54cm) – 25.4 microns rounded within +/- 2% in volume
If surface has a profile allow +10-30% spread rate eg. waves on galvanised iron 20% extra product

Water Based

Super Therm®
Sunshield
HSC Coating
HPC® Coating
HPC®-HT
Omega Fire
Super Base / HS
SP Interlock

Solvents

Rust Grip
Enamo Grip White
Enamo Grip Clear
Moist Metal Grip
Lining Kote UHS

WATER BASED

Super Therm®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Super Therm	60.0	250	0.25	10	2.4	8.9	96.2

Sunshield®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Sunshield	54.9	250	0.25	10	2.2	8.2	88.1

HSC Coating®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
HSC	70.0	1270	1.27	50	0.55	2.1	22.5
	70.0	2540	2.54	100	0.28	1.0	11.23
	70.0	5080	5.08	200	0.14	0.5	5.61
	70.0	6350	6.35	250	0.11	0.4	4.5

HPC® Coating

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
HPC	72.0	1270	1.27	50	0.57	2.1	23.1
	72.0	2540	2.54	100	0.28	1.1	11.5
	72.0	5080	5.08	200	0.14	0.5	5.77
	72.0	6350	6.35	250	0.11	0.4	4.62

HPC®-HT®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
HPC HT	80.0	12700	12.7	500	0.063	0.24	2.56
	80.0	25400	25.4	1000	0.031	0.12	1.28
	80.0	38100	38.1	1500	0.021	0.08	0.86

Omega Fire®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Omega Fire	65.0	12700	12.7	500	0.052	0.20	2.1
	65.0	25400	25.4	1000	0.026	0.10	1.04
	65.0	38100	38.1	1500	0.017	0.07	0.7

Super Base / HS®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Super Base / HS	50.0	250	0.25	10	1.96	7.4	80
	50.0	305	0.305	12.5	1.57	5.9	64
	50.0	375	0.375	15	1.30	4.9	53
	50.0	625	0.625	25	0.79	3.0	32

Note: Standard spread rates for different substrates (see technical data sheet).
For a specific project contact SP Coatings USA

SP Interlock®

Product	% solids by volume	Microns DFT	mm DFT	Mils DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
SP Interlock	3.0	12.2	0.012	0.48	2.45	9.3	100

2 coats at the same DFT for new concrete
3 coats at the same DFT for old concrete

SOLVENTS

Rust Grip®

Product	% solids by volume	Surface Profile Microns	Surface Profile Mils	Microns WFT / DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Rust Grip	51.4	50	2	300 / 150	3.37	12.8	137.4
	51.4	75	3	350 / 175	2.89	10.9	117.8
	51.4	100	4	400 / 200	2.53	9.6	103.1

NOTE: The number of coats necessary to achieve at least 100 microns / 4 mils DFT over the tallest peak of rust.

If surface profile is 25-50 microns / 1-2 mils the minimum WFT application is 300 microns / 12 mils and 150 microns / 6 mils dry, which will allow to fill a surface profile and to have at least 100 microns / 4 mils of DFT over the top of tallest peak of rust.

Enamo Grip® White

Product	% solids by volume	Surface Profile Microns	Microns DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Enamo Grip White	49.0	Three coats with Enamo Grip 200 x 3 coats (600)	294	4.91	18.6	200
	49.0	Two coats with Rust Grip primer 200 x 2 (400)	196	4.91	18.6	200
	49.0	Non-porous One coat with Rust Grip primer 200 x 1 (200)	95	4.91	18.6	200

Enamo Grip White: Porous surfaces: Three applications at 200 microns WFT / 98 microns DFT for a total of 600 microns WFT / 294 microns DFT. Rust Grip can be applied as a Primer and two coats of Enamo Grip.

Non porous surfaces: Rust Grip as a primer then 1 coat of Enamo Grip.

Enamo Grip Clear

Product	% solids by volume	Microns WFT	Microns DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
High Gloss	38.0	99 x Two Coats	37 (2 Coats)	9.96	37.7	406.0
Semi-Gloss	39.5	102 x Two Coats	40 (2 Coats)	9.69	36.7	395.0
Matt	41.0	104 x Two Coats	43 (2 Coats)	9.47	35.9	386.0

Moist Metal Grip (MMG)

Product	% solids by volume	Microns WFT	Microns DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Moist Metal Grip	80.0	200 x Two to Three Coats (600)	300 (3 Coats)	4.91	18.6	200

Lining Kote UHS

Product	% solids by volume	Microns WFT	Microns DFT	Spread m²/litre	Spread m²/gal	Spread ft²/gal
Porous Surfaces	80.0	Two to Three coats at 200 (400/600)	320 (2 Coats) 480 (3 Coats)	4.91	18.6	200
Metal Surfaces	80.0	MMG as Primer then two to three coats at 200 (400/600)	320 (2 Coats) 480 (3 Coats)	4.91	18.6	200