World's Coating Innovator™
Underwater Pipes Anti-Corrosion System, Nigeria
Industry: Energy and Mining
Location: Nigeria
Products: Rust Grip®, Moist Metal Grip and Enamo Grip
Global Partner: SP Coatings and Superior Products Europe
Nigeria Offshore Applications
The attached pictures show one of two applications performed in Nigeria.
The job is about pipes used for offshore oil drilling operations, subject to cycles of immersion underwater and storage on deck. Very tough environment and very tough life cycle (salt water, salt spray, sun, impacts, abrasion, and temperatures ranging from 5° to 120°c (40 to 250°F). The original coating system, applied four years ago, had badly deteriorated.
This coating system guarantees a maintenance-free, durable solution which can resist all surface threatening influences.
The application main steps were:
- Sand blasting to SSPC-SP6
- Surface cleaning and chloride removal
- Two coats of Rust Grip®
- Two coats of Moist Metal Grip
- Two coats of white Enamo Grip®
Before work started there was preparation work to clean, dry and make a sound surface ready to accept the SP Coatings System above.
Rust Grip® was applied as a primer. Rust Grip® stops rusting and deterioration.
Moist Metal Grip was then applied as a base coat. Moist Metal Grip will displace the moisture, attach on the surface, and stop further corrosion problems.
Finally a top coat of Enamo Grip® was applied. Enamo Grip® will give a smooth and durable finish, which prevents moisture from affecting the surface as well.
Project Gallery
Underwater pipes before work started
Underwater pipes before work started
Before work started there was preparation work to clean, dry and make a sound surface ready to accept the SP Coatings System
Before work started there was preparation work to clean, dry and make a sound surface ready to accept the SP Coatings System
Rust Grip® was applied as a primer.
Rust Grip® was applied as a primer.
Rust Grip® was applied as a primer.
Rust Grip® was applied as a primer.
Moist Metal Grip was then applied as a base coat.
Moist Metal Grip was then applied as a base coat.
Finally a top coat of Enamo Grip was applied.
Finally a top coat of Enamo Grip was applied.
Finally a top coat of Enamo Grip was applied.
The completed pipe
Underwater pipes undergoing complete corrosion protection
